Regma Transfert Thermique
French thermal transfer ribbon manufacturer since 1986
On a single site in Arques-la-Bataille, Normandy, REGMA has been formulating its inks, coating its polyester films and slitting its thermal transfer ribbons since 1986.
- Integrated manufacturer: formulation, coating and slitting on site
- ISO 9001:2015 certified, member of the Todaytec Europe group
- In-house laboratory and a team at your service

We are a manufacturer — coater and converter — of thermal transfer ribbons. Our extensive programme can meet most needs: from standard references available from stock to qualities developed by our laboratory for your specific applications.
We are particularly proud of our colour ribbon programme, one of the widest on the market with 100 references.
Contact usOur history
The Arques-la-Bataille site has been coating thermal transfer films since 1986 — forty years of coating expertise, today within the Todaytec Europe group.
- 1986
The site is established
Rhône-Poulenc began coating thermal transfer films at Arques-la-Bataille and producing ribbons there under licence from Dai Nippon Printing, establishing the site's long-standing expertise in thermal transfer ribbon technology and manufacturing.
- 2002
REGMA is acquired by CALOR
The German thermal transfer specialist CALOR acquired REGMA. From that point the two companies worked closely together across ribbon development, coating, converting and sales, combining French production capabilities with German commercial and technical expertise.
- 2012
First two-colour ribbons
Two colours in a single ribbon: fewer ribbon changes and faster printing. An exclusive development not available anywhere else on the market.
- 2017
First UV light activated ribbons
Developed with a specific customer application in mind, they marked a significant advance in thermal transfer ribbon technology.
- 2025
The Todaytec Europe group is formed
Since February 2025, REGMA and CALOR have been part of the Todaytec Europe group. Later that year, REGMA, CALOR and TTS began operating under a unified identity, bringing together manufacturing experience, technical expertise and a European sales network.
Know-how
We know what we are talking about. Pioneers of thermal transfer technology in Europe, we put our expertise and competence at your disposal.
Quality
The basis of our success. Employee training, strict adherence to product specifications and continuous monitoring of every production step: the result, products of excellent quality.
Cost control
Put us to the test. Modern machinery, lean organisation and optimised teamwork allow us to produce at lower cost and offer you competitive prices.
Service
You matter to us. Short delivery times, expert contacts and personalised support are our priorities.
Certifications & compliance
Certified quality management system.
All our qualities comply with EU directive 2015/863.
No quality contains any substance from the SVHC list.
Many qualities ISEGA-certified for food contact.
Some qualities UL/CSA-certified on specified materials.
Some qualities certified for chemical product labelling.
Our manufacturing process
REGMA is a vertically integrated manufacturer: ink formulation, polyester film coating and slitting of the finished ribbon all take place on a single site in Arques-la-Bataille, under an ISO 9001:2015 certified quality system. This end-to-end control lets us offer more than 40 formulations and develop, in our laboratory, the quality or colour a specific application requires.
Ink formulation
Our wax, wax-resin and resin inks are formulated in our own laboratory from selected pigments, waxes and resins. Each formulation is validated with a draw-down trial and then print tests before it goes into production.

Raw materials: pigments, waxes and resins 
Draw-down trial with a coating bar, REGMA laboratory 
Weighing and print tests at the bench Coating
Three coating lines apply the ink onto 4.5 µm polyester film to produce jumbo rolls. The site has been coating thermal transfer film since 1986; the thickness of the coated layer is monitored throughout production.

Coating line in operation 
Jumbo roll coming off the line 
The site's first coating machine, 1986 Slitting & packing
Jumbo rolls are slit to the requested width and length, with the core and winding direction your printer requires. Each roll is then labelled and boxed. We also have standard references available from stock.

Slitter-rewinder, REGMA workshop 
Fitting the cores onto the slitter shaft 
Slit rolls, before labelling and boxing Quality control & laboratory
Checks are carried out at every stage: print density, rub resistance on a crockmeter, dimensional inspection of the rolls and tests on thermal transfer printers. The in-house laboratory also develops new qualities and Pantone-referenced colours.

Print inspection under the microscope 
Rub resistance test (crockmeter) 
Dimensional check with a calliper
A specific application?
Our laboratory can develop the quality you need: send us your substrate and your specification and we will run the tests.