Services

Thermal Transfer Ribbon Glossary

55 thermal transfer terms, explained simply

From the base film to the print head, through standards and resistance tests: the vocabulary you need to read a data sheet and talk with our technicians.

  • Definitions written by our technicians, without unnecessary jargon
  • Related terms suggested on each definition to go further
  • Alphabetical index to find a term in one click
Checking a print under the microscope

A

B

C

D

E

F

H

I

L

N

O

P

Q

R

S

T

Telescoping effect

An effect observed when the ribbon slips on the core as it is loaded into the printer.

Thermal paper

Thermal paper is paper whose surface is impregnated with chemical substances that allow it to change colour under heat.

Thermal printhead

The printhead is the most important part of the thermal transfer printer. It consists of microscopic electrical dots, aligned on a support plate, each individually controllable.

Thermal transfer film

Thermal transfer film is the basis of the thermal transfer ribbon. During production, the ink is coated onto the base film and the film is then slit into ribbons. The ink-coated side can be wound either outside or inside the ribbon.

Thermal transfer printing system

Thermal transfer printing systems are strongly recommended wherever labels are used and variable information (text, graphics, barcodes) must be printed with high print quality.

Thermal transfer ribbon

Composed of a 4.5 µm polyester film, coated with a heat-sensitive layer (2 to 4 µm) on one side and a back-coating on the other.

Thick-film technology

Unlike thin-film technology, in thick-film technology the heating points and junctions are not as clearly separated from one another. On an uninterrupted line of resistors, the zones between two corresponding control lines are heated.

Thin-film technology

The heating elements of the printhead use either thin-film or thick-film technology. Thanks to the clear demarcation of the dots from one another, print quality is improved: each printed dot theoretically has the exact rectangular outline of the heating elements.

Top-coat

The label surface is treated with a special varnish that facilitates printing.

True-edge

This printhead is built vertically: the row of dots is not on the support plate but on the front. The true-edge printhead is very useful for printing systems where the head is positioned above a fixed substrate, or when printing onto a hard substrate.

TTR

Abbreviation for Thermal Transfer Ribbon.

U

W

A technical question?

Our team advises you on choosing the right ribbon for your application.

Contact an expert