TDM665
Premium near edge wax-resin
This premium wax-resin grade is an all-round high performance wax-resin that has a slightly lower content of resin. This allows for a better print performance on vellum, uncoated papers, coated and uncoated card tags, synthetic films, medical paper & Tyvek although there is a slight loss of durability when printed onto synthetic films.
It is particularly well suited to tray end card applications using Toshiba near edge printers found within the fresh produce packing industry. It offers bold, black prints at speeds of up to 14 inches per second (356 mm/s) and has proven itself as a direct alternative to the branded products supplied by OEMs such as Toshiba TEC, Avery, Markem, Videojet & ICE. ISEGA approval also makes this grade a suitable choice for printers used in food packaging applications.
- Excellent scratch resistance
- Prints at high speed, up to 14 inches per second (356 mm/s)
- Prints onto a wide range of substrates
- Available colour
- Black


Applications
- Pharmacy
- Shelf labels
- Logistics
- Retail
- General purpose
- Inventory
- Product identification
- Shipping
- Horticulture
- Fresh produce
- Healthcare
- Asset tracking
Performance
Properties
- Suitable for a wide range of materials, even uncoated papers thanks to its slightly lower content of resin.
- Excellent print quality at high speed (up to 14 inches per second, 356 mm/s)
- Particularly suited to tray-end card applications printed using Toshiba TEC near edge printers, commonly used in the fresh produce packing industry
- Can directly replace branded products supplied by OEMs such as Toshiba TEC, Avery, Markem, Videojet & ICE
- Very low printhead energy requirements
- Available from stock for most popular printers
- High performance backcoat for better printhead protection
Print speed
up to
356mm/s
14 IPS (inches per second)
Heat setting
Melting point
78 ± 3 °C
Resistance chart
Rated out of 10- Print sensitivity9/10
- Heat resistance6/10
- Abrasion resistance6/10
- Solvent resistance4/10
- Label adaptability8/10
Recommended substrates
Film Label
PET/PE/BOPP
Coated Paper
Matt coated, semi-gloss, high-gloss, tag board
Synthetic Paper
Specifications
| Film base | 4.5 µm polyester |
|---|---|
| Ribbon thickness | 6.3 µm ± 0.3 µm |
| Ink type | Wax-resin — near edge |
| Colour | Black |
| Melting point | 78 ± 3 °C |
| Density | 2.1 |
Storage conditions
| Temperature | 5 °C to 35 °C |
|---|---|
| Humidity | 20% to 80% relative humidity |
| Light | Avoid direct sunlight |
Available sizes
All the references below are in stock. Filter by width to find yours; the winding direction and core type are shown for each reference.
| Reference | Width (mm) | Length (m) | Winding | Core | Rolls / box |
|---|---|---|---|---|---|
| TDM665-033600P-IW | 33 | 600 | Inside (IN) | 25.6 mm plastic core, 2 spare cores per box | 25 |
| TDM665-033600P-OW | 33 | 600 | Outside (OUT) | 25.6 mm plastic core, 2 spare cores per box | 20 |
| TDM665-040600-IW | 40 | 600 | Inside (IN) | 25.5 mm card core, 2 spare cores per box | 20 |
| TDM665-055600-IW | 55 | 600 | Inside (IN) | 25.5 mm card core, 2 spare cores per box | 20 |
| TDM665-055600-OW | 55 | 600 | Outside (OUT) | 25.5 mm card core, 2 spare cores per box | 20 |
| TDM665-055600P-IW | 55 | 600 | Inside (IN) | 25.6 mm plastic core, 2 spare cores per box | 20 |
| TDM665-055600P-OW | 55 | 600 | Outside (OUT) | 25.6 mm plastic core, 2 spare cores per box | 20 |
| TDM665-0551000P-OW | 55 | 1000 | Outside (OUT) | Plastic | 12 |
| TDM665-056600-OW | 56 | 600 | Outside (OUT) | 25.5 mm card core, 2 spare cores per box | 10 |
| TDM665-064600-IW | 64 | 600 | Inside (IN) | 25.5 mm card core, 2 spare cores per box | 10 |
| TDM665-068600-OW | 68 | 600 | Outside (OUT) | 25.5 mm card core, 2 spare cores per box | 10 |
| TDM665-076600-OW | 76 | 600 | Outside (OUT) | 25.5 mm card core, 2 spare cores per box | 10 |
| TDM665-080600-IW | 80 | 600 | Inside (IN) | 25.5 mm card core, 2 spare cores per box | 10 |
| TDM665-084600-OW | 84 | 600 | Outside (OUT) | 25.5 mm card core, 2 spare cores per box | 10 |
| TDM665-089600-OW | 89 | 600 | Outside (OUT) | 25.5 mm card core, 2 spare cores per box | 10 |
| TDM665-090600-IW | 90 | 600 | Inside (IN) | 25.5 mm card core, 2 spare cores per box | 10 |
| TDM665-095600-IW | 95 | 600 | Inside (IN) | 25.5 mm card core, 2 spare cores per box | 10 |
| TDM665-102600-OW | 102 | 600 | Outside (OUT) | 25.5 mm card core, 2 spare cores per box | 10 |
| TDM665-104600-IW | 104 | 600 | Inside (IN) | 25.5 mm card core, 2 spare cores per box | 10 |
| TDM665-110600-IW | 110 | 600 | Inside (IN) | 25.5 mm card core, 2 spare cores per box | 10 |
| TDM665-110600-OW | 110 | 600 | Outside (OUT) | 25.5 mm card core, 2 spare cores per box | 10 |
| TDM665-110600P-IW | 110 | 600 | Inside (IN) | 25.6 mm plastic core, 2 spare cores per box | 10 |
| TDM665-110600P-OW | 110 | 600 | Outside (OUT) | 25.6 mm plastic core, 2 spare cores per box | 10 |
| TDM665-114600-OW | 114 | 600 | Outside (OUT) | 25.5 mm card core, 2 spare cores per box | 10 |
| TDM665-130600-IW | 130 | 600 | Inside (IN) | 25.5 mm card core, 2 spare cores per box | 10 |
| TDM665-130600-OW | 130 | 600 | Outside (OUT) | 25.5 mm card core, 2 spare cores per box | 10 |
| TDM665-134600-OW | 134 | 600 | Outside (OUT) | 25.5 mm card core, 2 spare cores per box | 10 |
| TDM665-160300-OW | 160 | 300 | Outside (OUT) | 25.5 mm card core, 2 notches | 10 |
| TDM665-160600-IW | 160 | 600 | Inside (IN) | 25.5 mm card core, 2 spare cores per box | 10 |
| TDM665-220300-OW | 220 | 300 | Outside (OUT) | 25.5 mm card core, 2 notches | 10 |
| TDM665-160600-IW | 220 | 600 | Inside (IN) | 25.5 mm card core, 2 spare cores per box | 10 |
Can't find your size?
We make it to measure: width, length, core and winding direction to your requirements.